CNC cutting machine general operation flow

In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/
Nowadays, the use of CNC cutting machines has become very common. People are familiar with new technology products. Of course, the freshness of CNC cutting machines may be just a few days after they have just learned the machine. Familiar with the machine, whether it can operate the machine in accordance with the operating flow of the CNC cutting machine, it is not necessarily, so a long period of neglect will affect the service life of the CNC cutting machine, there are always security risks. Therefore, it is necessary to operate according to the flow of the CNC cutting machine. You may wish to take a look at the missing operation.
Before the machine is on the machine, we have to check the gas path, the valve is intact, there is no leakage phenomenon, whether the pressure of the valve reaches the cutting standard, the cutting nozzle on the flame cutting gun is installed, there is no Necessary to change, for CNC plasma cutting machine we have to check whether the plasma power supply gas path is intact, there is no leakage phenomenon. Whether the pressure reaches the standard, whether the plasma power supply is normal, whether there is an alarm phenomenon, and whether the plasma power supply ground wire is connected to the workpiece. Whether the electrode and cutting tip on the plasma torch are installed properly, there is no need to replace it. Of course after checking these. Before powering the machine, we must also look at the presence of obstacles on each track.
2 When working on the machine, we must first adjust the parallel of the steel plate and the track, and then select the model of the cutting nozzle according to the thickness of the plate, the cutting speed and the piercing time, or adjust the current of the plasma power supply. When the CNC flame cutting machine warms up, Avoid too much rust on the plate, it will affect the warm-up time and cutting efficiency of CNC flame cutting machine. During CNC plasma cutting, do not adjust the current of the plasma power supply too much; it will affect the service life of the plasma torch and the electrode. Then pay attention to whether the vertical between the torch and the plate, to avoid cutting the workpiece section slope, thus affecting the quality of processing. When the CNC cutting machine is working, if there is any abnormality, it is necessary to immediately stop the work or press the emergency stop switch, but avoid moving the machine and the plate.
3 After the completion of the work on the machine, after the work of the CNC cutting machine is completed, it is better to run the CNC cutting machine back to the origin, close the gas lines and power supply, and then clean up the waste. After the completion, clean the dust on the various tracks and bearings of the CNC cutting machine. . Clean the CNC cutting machine. The next time it is used for work, it will be clean and people will feel relaxed.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! 】

PLG plate dryer is suitable for drying, calcination, pyrolysis, cooling, reaction and other operations in many industries, like chemical, pharmaceutical, pesticide, food, feed and agriculture


Applications
This type of plate drying equipment is suitable for drying, calcination, pyrolysis, cooling, reaction and other operations in many industries, like chemical, pharmaceutical, pesticide, food, feed and agriculture, specifically:
1. Organic chemical products: resin, melamine, aniline, stearate, calcium formate, and other organic chemical raw material and intermediate

2. Inorganic chemicals: calcium carbonate, magnesium carbonate, sodium chloride, cryolite, as well as various sulfate and hydroxide
3. Medicine, food: vitamin, medicinal salt, tea or flower extract, ginkgo leaf, and starch etc.
4. Feed, fertilizer: biological potassium, protein feed, food, seed, herbicide, cellulose, etc.

Features
1. Our continuous Plate Drying Machine is of easy operation and low power consumption (the maximum power consumption is not more than 15KW).
2. It meets the related dust emission standards.
3. It is simple to install and occupies small space (max. outer diameter: 3800mm).


Continuous Plate Dryer

Plate Drying Machine,Vacuum Plate Drying Machine,Countertop Dish Dryer,Continuous Plate Dryer

Jiangsu Yutong Drying Engineering Co.,Ltd , http://www.ytdryer.com